New Asian Firmware S800MDXIL3 for JET

Contains easy JAVA . Same features as S800XEII Firmware. with improved touch response and menu response.
CLICK HERE  for the download link

JAVA Apps for JET

Hey guys found some cool java apps....includes mediaplayer,filelocker etc
CLICK HERE for the link

Full Screen Touch Games for JET

Hey guys found some full screen games for JET,without the control Bar
Click HERE for Set1
Click HERE for Set2
Click HERE for Set3

Samsung Jet Wallapers(Resized)

Hi guys, got some JET wallpapers over the net.

For more Wallpapers Click Here

Samsung Jet S8003 Hidden Menu

Hey guys....found a secret menu code for Samsung Jet S8003, thought of sharing...
Just tap in the following in the keypad *#6984125*# no need to press dial key..
Then a pop up menu will appear . You can know your phones information in this.
If you want to configure your phone, like increase the earphone volume(Which i think is too low), speaker volume or use the front camera or wifi just go to the option 4. Internals .
The phone will ask for a master key. Just type in *#9072641*# and press confirm..
a new menu will pop up....do whatever you want in that...
If any critical value changes ,then you can do a master reset..

Or youcan try this one
*#5239870*#
internals master key
*#7092463*#


The method above is obtained from internet sources, try only at your own risk.
3NZ45QUSCRVE

Samsung JET Hidden Menu 2

Hey guys ..just found one more hidden menu.Type *#0*# in the keypad. A new popup menu will appear. This can be used to diagnose your camera, sensors or display. The front cam can be used as a mirror. Check it out

Best Screen Protection ZAGG

ZAGG's invisibleSHIELD™ is created from an ultra-tough, patented film that is exclusive to ZAGG for covering consumer electronics. Transparent and amazingly thin, the invisibleSHIELD is designed to precisely match the contours of every device, providing unbeatable scratch protection. ZAGG's invisibleSHIELD is the world's first and best solution of its kind, and the patent-pending application process will keep gadgets looking great.
Features

• Scratch-Proof, patented film
• Military Grade
• Lifetime Guarantee
• No added bulk
• Improves grip
• Invisible protection
• Easy to remove, leaving no sticky residue

1D/2D Barcode Reader Software For JET

Mobile barcodes, storing addresses and URLs, are a new and innovative way to access the mobile internet where users can use the camera on their mobile phone to scan barcodes that may appear in magazines, newspapers, billboards, LCD/plasma screens, packaging, business card and even t-shirts. A user having a mobile camera phone equipped with the correct reader software can scan the image of the 2D barcode causing the phone browser to launch and direct to the programmed URL. Codes can be used to provide fast-track access to mobile websites, special discount offers, send an SMS, and receive a ring-tone, save contact details on mobile address book.


http://www.i-nigma.com/Downloadi-nigmaReader.html

Modded Samsung JET

Hey all
Decided to do a major change, just flashed my Samsung JET with new firmware september realease (S8000XEII2). I kinda like it. One of the best feature is that you can customize your home menu, you dont have to scroll to reach your icon.The music player interface is awsome, the album art is given a bigger space compared to the factory fitted one. The volume buttons are also changed.The media manager has also undergone some changes. A new feature called connected home is there. You can connect your device to other DLNA devices and share images and video..Will upload 'How to flash Samsung JET' video soon

Enabling GPS Navigation.

1. Enable and Save
2. Phone Automatically Restarts.
3. Go to site given in description.
4. Download software and install
5. Connect Phone in mass storage mode.
6. The rest of software will be installed by PC.
7. New navigation icon appears in menu.
8. Enjoy free road maps.

http://www.66.com/samsung/index.php?cid=US&act=1

Hi all ..
the samsung navigation feature is hidden in most of the JET phones. Using this video you can enable it and use route 66 software for your navigation needs. The route 66 offers free road maps. And the MY Position function in the navigator really works. While enabling the navigation feature, the phone saves and retstarts. It may restart continually(Happened for me) in that case just remove the battery and reinstall and turn back on. The new navigation icon will appear but 'it wont run' because the software is not fully installed. So you need to go to the route 66 site given above and download the sync software for samsung JET and install it. Once intalled connect your phone in mass storage mode and route 66 will automatically detect the phone and install the software. On the phone after installing the program may ask to get license key from server. Just click no and you are good to go.You can go to route 66 store to get free road maps.Enjoy!!

Note:

Please try the above at your own risk.

Flashing Samsung JET

INSTRUCTIONS (COURTESY DARKFORESTGROUP)




This is for experimental use only, Flash At Your Own Risk!!!! You can not back up your original firmware, so you will loose any applications install by your provider.

SIM LOCK or NETWORK LOCK
First thing to check is that your phone does not have simlock! If it does, you MUST take your phone to a shop that can remove it. It is not expensive but MUST be done first or you will FREEZE your phone. If you freeze you phone it will cost you even more to get it fixed! Just type *#7465625# and look for Sim Lock or Network and make sure it says OFF.

Prepare the PC
Here you must download the essentials. First download Samsungs New PC Studio This contains the drivers you for the computer to recognize the phone in bootloader mode. When you download go ahead and install it, when it is finished restart the computer and plug up your phone. If NPS dose not start on its own it OK just start it by clicking the icon. When it comes up it should recognize your phone, IF IT Does NOT, unplug the phone and set it for “mass storage” then try it again and should work. Next download the Multiloader it is the software you will use to flash your phone. Last, download the firmware you want.  Once the firmware is downloaded then unzip it to a location you can easily find it on your computer.

Prepare Your Phone

Back up every thing you dont want to loose! Every thing! Even phone numbers and pictures! So many people have failed to do this and there is no way to recover it! After you back up do a Hard Reset on your phone. Type *2767*3855# and wait for the phone to restart. After it restarts, let it sit about 3 min before proceeding.
Multiloader
Before you connect the phone to the computer, turn it off and put in bootloader mode. Depending on your phone this can be done in several different ways, so refer to the flash guide for this step.
Now you are ready for the flash guide! Click here to proceed
Good Luck!!!

Step 1 You must follow this step!!!!

------------------------------------Set Up Your Computer------------------------------------------

1. Install NPS on your computer and make sure it will communicate with your phone.
2. Disconnect your phone and Close NPS.
3. Click "Start" or the Windows logo on the bottom left of your computer screen and click in the search/run box and type msconfig.
4. Select the tab marked "Start Up" and click "disable all" and click ok.
5. Restart the computer and you are ready to flash.

DO NOT! run NPS again until you have successfully flashed your phone! After you have successfully flashed your phone, you must reset the Windows setting back to there original and restart your computer.



-------------------------------------Now continue with the flash----------------------------------


WARNING!
Make sure your phone does not have sim lock before you try and flash.
Type *#7465625# and make sure the SIMLOCK is OFF, if it is ON you MUST
take it to a shop and have it removed or you will freeze your phone!


First thing to always remember, is BACK UP YOUR PHONE, Pictures,wallpapers,
music, and any contacts you have saved on your phone. I am not responsible
for any damage to you, your phone, computer, or lost of data in this process.
This is a guideline intended for professional technicians.
USE AT YOUR OWN RISK!!!

What you will need:
1. USB cable that came with your phone.

2. New Samsung NPS

Install this software first, it contains the drivers for your phone, and has every thing you need for backup.

3. Multiloader 5.56

http://www.ziddu.com/download/8199103/MultiLoader_V5.56_2.rar.html

4. New firmware

http://www.mediafire.com/file/zwnzizzzdmj/S8000XEII2.rar
 


-----------------------------Now you are ready to begin-----------------------------------

1. Make sure Samsung PC Studio is installed and communicates with your phone. And unpack
the firmware in a folder you can easily find it.
2. Remove the Sim and MicroSD from your phone and replace the battery.
3. MAKE SURE THE PHONE IS OFF AND NOT CONNECTED TO THE COMPUTER.
4.  Hold down the "Volume -" button on the left  side ,
and the "Camera" button on the right, then press the "Power" button = all three buttons
need to be pressed together. Your phone should start up into a red\blue on black bootloader screen.)
5. Now run MultiLoader v5.54
6. Plug the phone up to the computer.

---------------------------------Multiloader Steps------------------------------------------

1. Select the radio button FOR JET= LSI6410
2. Select Boot Change
3. Full Download
4. Master rom

5. Then click Boot, and select the boot files from the unpacked firmware folder.

6a. Select Amss

6b.Select Apps


7. Rsrc1

8. Rsrc2(Low) Do not use! (Mid).r2c.  (Warning! phone may not restart if you select mid)

9. Select the Factory FS file.

***FOTA and ETC fields are left blank.****

10. Click the Port Search button, it will find your phone and show the com port is ready.

11. Click the download button and be patient, this will only take a few minutes to complete.

12. When it's finished, it will show "ok complete".

13. Unplug the phone from the USB cable, reinstall the sim and SD card.
*** NOTE Some models and some will not, if yours does not restart at this point, take out the battery a few seconds then reinsert it. NOTE ***

14. Now with every thing is complete, You can perform a hard reset by typing *2767*3855# into the hand set
(but not necessary.)
15. When the phone resets type *#1234# into your handset to check your new firmware ver. 


***NOTE!***
If your phone fails the flash for any reason, DO NOT TRY AND RESTART IT!!!!! Restart the computer
and try the flash again!


You need to perform the camera firmware update, Admin codes have been changed on recent FW:
   a. Type *#197328640# in the Idle mode, then you can reach the test mode.
   b. Select [6] Video
   c. Select [3] Camera Firmware update
   [Please Wait] will be displayed.

   Wait a few minutes then [Please Wait] will be changed to [SUCCESS]



The video is meant for viewing purpose only. Please do not try to flash your phone as you may lose the phone warranty.

Flashing will  result in loss of data ,phone contacts and customized settings.